JSS Digital Solutions Sdn Bhd
A-11-1, Blk A,
Putra Walk, Jalan PP25,
Taman Pinggiran Putra,
Seksyen 2, Bandar Putra Permai,
43300 Seri Kembangan,
Selangor, Malaysia.
A-11-1, Blk A,
Putra Walk, Jalan PP25,
Taman Pinggiran Putra,
Seksyen 2, Bandar Putra Permai,
43300 Seri Kembangan,
Selangor, Malaysia.
+6016-212 7872
+603-8940 8521
PCS250
Previous | 9 / 14 | Next |
Paradox GPRS/GSM communicator module only (without auxiliary power card)
∙ Report events to the IPR512 GPRS/IP Monitoring Receiver and/or IPRS-7 IP/GPRS PC Receiver Software
∙ Report via text message (up to 16 cell phone numbers)
∙ Control panel communication supervision
∙ End-user can arm or disarm the system by sending a text message (SMS) to the PCS250
∙ Send pre-recorded voice messages to up to 8 telephone numbers to report alarms using the optional VDMP3 Paradox Plug-in Voice Module (GSM mode)
∙ Simple installation with 4-wire serial connection∙
∙ Optional rod antenna can be installed up to 18m (60ft) from the module using optional antenna cable extensions depending on the local signal strength
∙ 128-bit (MDS) and 256-bit (AES) encryption (GPRS mode)
∙ Increase the distance between the panel and the PCS250 module with an RS485 link (GSM mode only via e-bus).
A CVT485 module must be added to the panel in order to accomplish this
∙ Report via GSM (CID, SIA)
∙ Report events to the IPR512 GPRS/IP Monitoring Receiver and/or IPRS-7 IP/GPRS PC Receiver Software
∙ Report via text message (up to 16 cell phone numbers)
∙ Control panel communication supervision
∙ End-user can arm or disarm the system by sending a text message (SMS) to the PCS250
∙ Send pre-recorded voice messages to up to 8 telephone numbers to report alarms using the optional VDMP3 Paradox Plug-in Voice Module (GSM mode)
∙ Simple installation with 4-wire serial connection∙
∙ Optional rod antenna can be installed up to 18m (60ft) from the module using optional antenna cable extensions depending on the local signal strength
∙ 128-bit (MDS) and 256-bit (AES) encryption (GPRS mode)
∙ Increase the distance between the panel and the PCS250 module with an RS485 link (GSM mode only via e-bus).
A CVT485 module must be added to the panel in order to accomplish this
∙ Report via GSM (CID, SIA)